|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 93984A REPETITIVE AVALANCHE AND dv/dt RATED HEXFET TRANSISTORS SURFACE MOUNT (LCC-18) Product Summary Part Number IRFE220 BVDSS 100V RDS(on) 0.80 ID 2.8A (R) IRFE220 JANTX2N6790U REF:MIL-PRF-19500/555 200V, N-CHANNEL LCC-18 The leadless chip carrier (LCC) package represents the logical next step in the continual evolution of surface mount technology. Desinged to be a close replacement for the TO-39 package, the LCC will give designers the extra flexibility they need to increase circuit board density. International Rectifier has engineered the LCC package to meet the specific needs of the power market by increasing the size of the bottom source pad, thereby enhancing the thermal and electrical performance. The lid of the package is grounded to the source to reduce RF interference. Features: n n n n n n n n Surface Mount Small Footprint Alternative to TO-39 Package Hermetically Sealed Dynamic dv/dt Rating Avalanche Energy Rating Simple Drive Requirements Light Weight Absolute Maximum Ratings Parameter ID @ VGS = 10V, TC = 25C ID @ VGS = 10V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Pckg. Mounting Surface Temp. Weight For footnotes refer to the last page 2.8 1.8 11 14 0.11 20 0.242 2.2 1.4 5.0 -55 to 150 300 (for 5s) 0.42(typical) Units A W W/C V mJ A mJ V/ns C g www.irf.com 1 08/07/07 IRFE220, JANTX2N6790U Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified) Parameter BVDSS Drain-to-Source Breakdown Voltage BV DSS /T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current Min 200 -- -- -- 2.0 1.5 -- -- -- -- -- -- -- -- -- -- -- -- Typ Max Units -- 0.25 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6.1 -- -- 0.80 0.85 4.0 -- 25 250 100 -100 14.3 3.0 9.0 40 50 50 50 -- V V/C V S A nA nC Test Conditions VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 10V, ID = 1.8A VGS = 10V, ID = 2.8A VDS = VGS, ID = 250A VDS > 15V, IDS = 1.8A VDS = 160V, VGS = 0V VDS = 160V VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS = 10V, ID = 2.8A VDS = 100V VDD = 74V, ID = 2.8A VGS = 10V, RG = 7.5 IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance ns nH Measured from the center of drain pad to center of source pad VGS = 0V, VDS = 25V f = 1.0MHz C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance -- -- -- 260 100 30 -- -- pF Source-Drain Diode Ratings and Characteristics Parameter IS ISM VSD trr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min Typ Max Units -- -- -- -- -- -- -- -- -- -- 2.8 11 1.5 400 4.3 A V ns C Test Conditions Tj = 25C, IS = 2.8A, VGS = 0V Tj = 25C, IF = 2.8A, di/dt 100A/s VDD 50V Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter RthJC RthJ-PCB Junction to Case Junction to PC Board Min Typ Max -- -- -- -- 8.93 26 Units C/W Test Conditions Soldered to a copper clad PC board Note: Corresponding Spice and Saber models are available on International Rectifier Website. For footnotes refer to the last page 2 www.irf.com IRFE220, JANTX2N6790U Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFE220, JANTX2N6790U 13 a & b Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRFE220, JANTX2N6790U V DS V GS RG VGS Pulse Width 1 s Duty Factor 0.1 % RD D.U.T. + -V DD Fig 10a. Switching Time Test Circuit VDS 90% Fig 9. Maximum Drain Current Vs. Case Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFE220, JANTX2N6790U 15V VDS L DRIVER RG D.U.T IAS tp + - VDD A VGS 20V 0.01 Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50K QG 12V .2F .3F 10 V QGS QGD VGS 3mA D.U.T. + V - DS VG Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit 6 www.irf.com IRFE220, JANTX2N6790U Foot Notes: Repetitive Rating; Pulse width limited by maximum junction temperature. ISD 2.8A, di/dt 94A/s, VDD 200V, TJ 150C Suggested RG = 7.5 VDD = 50V, starting TJ = 25C, Peak IL = 2.2A, L = 100H Pulse width 300 s; Duty Cycle 2% Case Outline and Dimensions -- LCC-18 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 08/2007 www.irf.com 7 |
Price & Availability of IRFE22007 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |